Quick Answer: How Do You Hang A Valance Over A Curtain?

What is the purpose of a window valance?

A valance is a piece of fabric that hangs across the top of a window to hide other window treatment’s hardware and add softness, color, and pattern..

Why can’t I drill around my window?

You may be drilling too close to the corner of the drywall where it meets the window sill area. The drywall techs usually install a metal corner guard under the plaster and the bit you’re using isn’t for metal. … I’d suggest using a stud finder before drilling any holes in a wall.

Can you hang curtain rods with Command Strips?

Many landlords don’t allow renters to drill holes into walls, which is necessary for installing curtain rod hooks. Fortunately, it is still possible to install curtain rods with Command hooks.

Do you need two curtain rods to hang a valance?

We recommend using two single curtain rods of 1″ – 2″ in diameter: the top one is for the valance with swags and tails, and the lower one for the two curtain panels. This way, you have more flexibility in adjusting height, width and projection (distance from the wall).

How do you hang a valance without a curtain rod?

Hang a valance without a curtain rod –use adhesive Velcro and attach to top of blinds.

What can I use instead of a valance?

Tablecloth Linens. A crafty homeowner can whip up a window treatment with any textile—even table linens! Debbie from Debbie Doo’s took pretty cloth napkins and hung them from a rod using curtain clips. The result is an easy and cheerful alternative to a traditional valance.

How long should a valance be on a window?

The length of the valance should be 1/4 the window height plus one inch. Using these measurements, cut a rectangle from your fabric and lining.

Are window valances outdated?

If when you think of valances, you imagine droopy valances without form made of some cheap polyester jacquard, then they definitely are dated and most definitely out of style. … Just like any product, valances are still used quite frequently by professional interior designers, even in the most modern of homes.

How do you fix a curtain without a rod?

Take one of your 3M Command hooks, take off the paper backing on the adhesive strips, and line the hook up on the wall using the pencil mark for guidance. Press it on the surface well, holding for at least 30 seconds, then let it be for at least a half hour. Repeat the same for the other side.

Where do you hang a valance?

Tip #1: Hang the Window Treatment High The pole or valance should be positioned a minimum of 4 inches and a maximum of 12 inches above the top of the window in most cases. Even a budget valance or unlined curtain panel can look well done and professional when hung at the proper height above the window.

How far apart should Valance be from curtain?

Another rule of thumb used by decorators is that the window valance depth should be 1/4 of the overall window height, plus 1 inch. A 60-inch tall window, then, would call for a 16-inch deep valance, while a 48-inch window calls for a valance about 13 inches deep.

How much of a window should a valance cover?

about 2 to 6 inchesFor most windows, a valance should cover about 2 to 6 inches of the top of the window and window frame (this is called the window overlap), with the rest of the valance covering the wall above the window. If there is not enough room to do this, then the valance should be hung immediately under the ceiling.